ePBX100A-128
30 Extensions IP-PBX for small office
  • Support up to 30 Extensions to register
  • Up to 15 NAT Traversal concurrent calls
  • Voice mail box
  • Easy interface to other IP-PBX
  • Flexible Auto Attendant
  • Provide CDR in real time
  • Flexible Routes and Dial Plans

Introduction
Information
DataSheet
Documents
Product Image (high res)

ePBX100A-128 is an small SIP based IP-PBX which allows
up to 30 IP devices to register. It is flexible to support
WAN port connect to internet and LAN port to private IP
or DHCP. By NAT voice traversal features, the calls are
free between internet and inside IP. This device is suitable
for small office PBX application for inter-office calls or talk
to remote office via internet or VPN network. It is easy to
connect with external FXO gateway to interface with local
PSTN line or PABX’s extension and IP Phone extensions.

It supports Rich traditional PABX features and flexible
connection with other analog Telephony via FXS gateway
and IP based devices. Calls can be implemented between
them by using existing dial behavior without hassle.

Applications

ePBX100A-128 is a SIP IP-PBX device to connect with IP network to receive/make calls. 
And also connect to other IP-PBX or SIP Server to make IP calls. It allows remote IP 
devices which were installed behind router to register and make calls. It is compatible 
with broadband internet service device such as ADSL/Cable Modem and WiMax/3G 
Modem via WAN port and local IP devices to connect at LAN port to call between WAN 
and LAN ports.

Specifications
  • Interface:
    • Ethernet port (RJ-45, 10/100 base-T)
    • 1-WAN port, connect to IP Network
    • 1-LAN port connect to local network
    • DC +12V power input Jack
    • LED Indicator for SIP and Network status
  • IP Network connection
    • IPv4 (RFC 791) for WAN and LAN ports
    • IP/ICMP/ARP/RARP/SNTP
    • NTP Server and Time Zone setting
    • Email address, SMTP Setting
    • Static IP
    • WAN : DHCP, Fixed, PPPoE, DDNS
    • LAN : Static Private IP or DHCP Server
    • VLAN on WAN and LAN port
    • PPPoE Client
    • DDNS ( DynDNS )
    • DNS Client
    • DMZ Setting
    • NAT traversal for voice and SIP commands only
    • Install behind NAT
    • Remote and local NTP server with time zone configuration
    • TCP/UDP (RFC 793/768)
    • RTP/RTCP (RFC 1889/1890)
    • Download/Upload Bandwidth control
    • Filter Selection: URL, IP, MAC address, port and application
    • Port forward
    • Maximum and Reserved Bandwidth setup by Percentage or Specific Rate
  • SIP Protocol :
    • RFC3261 compliance
    • SIP UDP Protocol
    • Support SIP compact Form
    • Support SIP HOLD Type
    • MD5 Digest Authentication (RFC2069/RFC2617)
    • Allow FXO/FXS gateway, IP Phone to register.
    • Link to desire remote IP-PBX or SIP server with security control
  • Audio Codec :
    • G.711 A-law/μ-law, G.729, GSM and G.723.1 pass-through
    • Support pass through Video Call
    • Packet Loss Compensation
    • Automatic Gain Control
    • Out Band DTMF (RFC4733, RFC2833 / SIP INFO)
    • Adaptive/Configurable Jitter Buffer
    • G.168 Acoustic Echo Cancellation
    • Selectable Call Progress Tone
    • Call Features :
    • Automatic voice attendant
    • Record your own greeting voice messages via analog phone set
    • Left voice messages to Email address or inside Flash memory
    • NAT Traversal configurable
    • Busy Line Call Monitor : Caller/Called number, start/stop time.
    • Extension and Trunk current setting indication
    • Call Forward (Busy, Unconditional, No Answer)
    • Configurable Call and Pickup group
    • Block Anonymous Call
    • Music Ring Back Tone
    • Music file format : WAV or MP3
    • Call Hold
    • Call Transfer
    • Call Park
    • Flexible Dial Plan
    • Configurable Feature Codes (PABX features) to dal from keypad
    • Support 2 Offices/Locations call rule to configure
    • Call-in Rule : desire working/non-working time, Operator Group, desire 
      Auto-Attendant play time.
    • Outgoing Routing Rule (Drop, Replace, Add) and Routes selection
    • Incoming Routing Rule (Drop, Replace, Add)
    • Dial Group Setting
    • Call Group, Pick up group Setting
    • Speed Dial configuration
    • 8-party Conference Call
    • T.38 FAX Call setting
    • Configure maximum concurrent SIP or FXO Trunk calls
    • Desire Trunk ID call
    • RTP Routed or Direct mode selection
    • SIP Trunk and FXO Trunk setting
    • Flexible Routing Plan
    • BLF, Busy Extension Status Indication
    • Voice broadcasting over IP Phone with separated group
      ( 6 IP Phones per broadcasting group )
    • Provide real time CDR to external Billing server or store inside
  • MANAGEMENT :
    • Administrative Telnet and HTTP and port number configuration 
      (Windows IE Browser Only)
    • Subscriber information display
    • Call Monitoring (current status)
    • Multilingual Web User Interface
    • HTTP port and user ID, Password control
    • Telnet port and Password control
    • Firmware and Library upload
    • Hold Tone (Music RBT) File upload (Wav and MP3 format)
    • Import: Configuration, IVR package, IVR(GSM) file, extension
    • Export: Configuration, IVR package and extension.
    • Configuration Backup/Restore
    • Reset to Factory default setting
    • Soft-Reset or Reboot System
    • Status display: Network, Line, SIP Trunk status
  • Environmental :
    • Dimension: 17.5(W) x 12.5(H) x 3.2(D) CM
    • Weight: 0.6kg (One unit with packing)
    • Operating Temp. & Humidity
      • Temp.: 0°C~45°C (32°F~113°F)
      • Humidity: 10%~90% relative humidity, non-condensing
    • Maximum Power Consumption : 8 Watts (0.6A at 12Vdc)
    • Power Adaptor:
      • INPUT: AC100V~240V, 50/60Hz
      • OUTPUT: DC 12V, 1.0A
  • Approvals:
    • CE, FCC, LVD and RoHS
  • Country of origin:
    • Made in Taiwan
  • Packing Accessories
    • ePBX100A-128 main unit x 1 pcs
    • AC to DC+12V Power adaptor x 1 pcs
    • CD User Manual x 1 pcs
  • Warranty
    • One year