|
SIPPBX 6200A
IPv6 and IPv4 dual stack SIP IP-PBX
|
 |
- Asterisk Base SIP IP-PBX
- IPv6 and IPv4 Dual Stack
simultaneously
- Support up-to 200 Register Accounts with 50 concurrent calls
- Rich Telephony PBX Features
- Support IVR and Voice Mail
- Toll Restriction
|
|
|
Introduction |
|
SIPPBX 6200A is a SIP based IP-PBX which supports both
IPv6 (WAN port) and IPv4 (LAN port) network address
simultaneously. It is built-in embedded Linux OS with
Asterisk SIP Stack. By making customization and
optimization of Asterisk SIP protocol to SIPPBX 6200A, it is reliable and user friendly to use as regular IP Network
device. You don’t need to concern Asterisk Source code
modification, SIPPBX6200A is ready done what features you need. Just simply use Web Browser to Login in
SIPPBX 6200A and enable your desire feature and function
and it is ready to use immediately. |
|
 |
|
IPv6 IP-PBX is ready to Market |
IPv6 address was developed for years, however, it was not practical to our life up to date. More and more electronic devices are able to link to IP Network. This makes existing IPv4 address supply in shortage to global market. Meanwhile, the emerging countries are not able to increase IPv4 address supply due to strong market demand on broadband services. SIPPBX6200A is an SIP based IP-PBX which built-in both IPv6 and IPv4 IP address. No matter when you are ready to deploy IPv6 network now, or reserve the future expansion to IPv6 from existing IPv4 address, SIPPBX6200A is ready to go with you. Both IPv6 and IPv4 address are working simultaneously at Voice IP Call. Its flexibility of both IPv6 and IPv4 accept and interwork both addresses on today and tomorrow when you need. |
|
Rich PBX Telephony Features |
SIPPBX 6200A supports not only traditional PBX telephony features, but also VoIP
based call via local LAN as well as Internet or private VPN Network. It allows employees to make or receive a call over Internet no matter where they are, for instance, Home ADSL network, public WiFi network, overseas travelling and remotely branch office. SIPPBX 6200A is highly compatible with SIP based CPE devices such as IP Phone, PC based Soft Phone, Smart Phone with SIP software.
Its features are more than an PBX, but also an telephony cost saving and convenient devices to talk to your co-workers. |
|
Configure IP Phone is easier than before |
SIPPBX6200A supports HTTP provision feature via MAC address inside. An unique MAC address profile at each LP600N IP phone was created inside SIPPBX6200A before installation on-Site. It allows system manager to change each LP600N IP Phone configuration and firmware upgrade remotely. Moreover, LP600N has built-in dual Flash memory to avoid from crashing firmware during un-proper firmware upgrade procedures. This feature reduces a good deal of engineer installation time on-site. |
|
Specification |
- Interface:
- Ethernet ports (RJ-45, 10/100/1000 Base-T)
- 1-WAN port, for connecting to Internet
- 1-LAN port for connecting to Private Network
- AC power Line input outlet
- IP Protocol :
- SIP RFC 3261 Compliance and Asterisk Compatible
- Asterisk version 1.4
- Linux OS version 2.6.28
- Support IPv4(RFC791) and IPv6(RFC2460) Dual Stack
- Network (IPv4): Support Fixed IP, DHCP, and PPPoE mode
- Network (IPv6) WAN port only: Support Fixed and Auto config
- IVR :
- Web Based Auto Attendant call rule
- Schedule or Fixed Greeting Rule
- Support diverse Branch offices Greeting
- Build System Prompt(Greeting) file via extension Phone set
- Voice Mail :
- Voice Mail was sent to designated email address
- Email Subject
- Email Encode
- Email body (Content)
- Message Envelope Function enable/disable
- Message Envelop Format ( English or Chinese )
- Voice Mail maximum length and count set
- Message Waiting Indication ( MWI )
- Personal Greeting
- Toll Restriction :
- Support different levels Toll Restriction Service
- Support Call Duration Restriction
- Support Personal Password
- Support outgoing call Routing Password
- Call Features :
- Flexible Extension Logic
- CPE Based Call Transfer (Consultant, Blind)
- Server Based Call Transfer (Consultant, Blind)
- Call Forward (Busy, No Answer, Unconditional, Unavailable)
- Call Hold and Retrieval
- Call Routing
- Features configuration by pressing short Code via phone set
- Extension configuration and status display
- Outgoing Call Trunk setting
- Select SIP Trunk Registration
- Outgoing Call Routing Table
- Prefix code
- Digit Length ( 25 digits max. )
- Template file download
- 8 Priority destination numbers
- Add and Drop digits
- - Outgoing call password
- Incoming Call Routing Table
- Prefix code
- Digit Length
- Add and Drop code
- Call Waiting
- Call Pickup (Global, Specific)
- Call Park
- Call Camp-On (Call Back on Busy)
- CLIR (Caller Line Identification Restriction)
- DND (Do Not Disturb)
- Dial Group
- Group Number
- Assign Phone numbers to this group
- Ring All, Sequential Ring and Dynamic Ring
- Group No Answer play voice greeting, or left voice mail to designated Phone.
- Speed Dial
- Music Ring Back Tone
- Music On Hold
- Music On Transfer
- Built-in CDR Report
- Call Monitor
- Broadcasting Service ( Up to 16 IP Phone per group )
- Meet Me Conference (8-Party with G.711 voice codec)
- T.38 FAX supported ( IPv4 Only )
- Audio/Video Codecs :
- G.711 A-law and μ-law
- G.729
- G.723 Pass-Thru
- GSM 6.10 (full rate)
- H.263 Video Codec Pass-Thru
- MPEG4 Pass-Thru
- Technical Features :
- Support Subscriber Registration for IPv4 and IPv6
- Support Call Routing Between IPv4 and IPv6
- Support RTP Proxy Between IPv4 and IPv6
- Support DDNS
- Built-in NTP Client/Server
- Built-in DHCP Server
- Built-in Simple Firewall
- Subscriber NAT Traversal
- Behind NAT Support
- Voice Codec Translate (G.711, G.729 and GSM)
- DTMF: in-band, RFC2833 and SIP-Info
- Maximum Capacity :
- 200 Concurrent Registration users
- 50 Concurrent Calls (Routing Mode)
- MANAGEMENT :
- Auto Configure (Support LP600N only)
- Multiple Language Support (English and Chinese)
- Management: Web Browser Management
- HTTP Firmware Upgrade
- Export/Import Configuration
- NTP time setting with time zone
- SMTP Server and Email address setting
- HTTP access to WAN port number and enable/disable
- Telnet access to WAN port number and enable/disable
- Ping WAN port (IPv4 only) enable/disable
- Web Browser Firmware Upload
- Web Browser Hold Tone, Ring Back Tone Upload
- Configuration Backup/Restore
- Import Setting: Configuration, IVR Package, IVR WAV File
- Export Setting: Configuration and IVR Package
- Web Browser RESET to Default
- Web Browser Reboot System
- Web Browser POWER OFF System remotely
- Display System Firmware and Library information
- Subscribers Status Display
- On-Line Call Monitor
- CDR Report
- Send out via TFTP
- Send to remote Host IP Server
- Display and Export CDR
- Caller and receiver number
- Start Date and Time
- Elapsed time and Bill Time
- Status
- Environmental :
- Dimension: 42.8 x 25 x 6.5 CM (1.5U/19-inch) without packing
- Weight: 5.9kg (One unit with packing)
- One unit packing dimension: 55 x 37.5 17.5 CM
- Operating Temp. & Humidity
- Temp.: 0°C~45°C (32°F~113°F)
- Humidity: 10%~90% relative humidity, non-condensing
- AC Power Line:
- INPUT: AC100V~240V, 50/60Hz
- AC Power Consumption : 16 Watts
- Approvals:
- Country of origin:
- Packing Accessories
- SIPPBX 6200A x 1 unit
- AC Power Cable x 1 pcs
- Rack Mount bracket x 2 pcs
- CD User Manual
- Warranty
|
|
Comparison Table between SIPPBX 6200A and other Welltech’s IP-PBX models |
| |
6200A |
6200S |
6200GS |
6200N |
ePBX100A-128 |
| SIP Stack |
Asterisk 1.4 |
Licensed |
Licensed |
Licensed |
Asterisk 1.4 |
| Support IPv6, IPv4 |
YES |
IPv4 Only |
IPv4 Only |
IPv4 Only |
IPv4 Only |
| LCD Display |
NO |
YES |
YES |
YES |
NO |
| Embedded OS |
Linux 2.6.28 |
Windows XP |
Windows XP |
Windows XP |
Linux 2.6.16 |
| FAX to Email |
NO |
YES |
YES |
YES |
NO |
| Maximum Users |
200 |
200 |
400 |
1000 |
30 |
| Maximum Concurrent Calls |
50 |
100 |
200 |
500 |
15 |
| Delivery Status |
NOW |
NOW |
NOW |
NOW |
NOW |
|
| |
